Showing posts with label Circuit. Show all posts
Showing posts with label Circuit. Show all posts

Scott Fluid Circuit System Engineering Essay

 


To measure the major head losses of the fluid using Scott Fluid Circuit System. As well as, analyzing the relation between the pressure, velocity and the friction arising from the flow.


In this lab, an approach of Reynolds theory was used to determine the head loss within the flow of the fluid suing Scott fluid circuit. The Experiment was conducted using two different sizes of pipes which were ¾ in and 1 in.


For the ¾ in, the moody chart was referred for the value of friction factor using the roughness and the Reynolds no. The Roughness curve does tend to close out at Reynolds number = 10^5 after which the curve analysis is required to determine the appropriate friction factor. The experiment did conclude the least possible % error for the venturi meter height of 5.25 inches. Other errors does tend to describe the error in the analysis of the data or some other elements factoring the data collection.


According to Reynolds, there are two types of pipe flows:


Laminar Flow


Turbulent Flow


Laminar flows are low in velocity and the fluid particles move in a straight line. Whereas, the turbulent flows are high in velocity and motion of the fluid particles are irregular.


As the fluids are viscous, they lose energy when flowing due to friction. The Pressure loss due to friction is termed as the head loss.


The Flow Rate, Q; Q1 = Q2 = Constant


Or, V1 = V2 = Constant


Change in the Pressure and Gravity can be equated to the head loss, i.e,


Head loss due to friction is in a circular pipe, flowing laminar or turbulent flow for


f=friction factor


L=length of pipe


D=diameter of pipe.


?= Kinematic viscosity


And for the Reynolds number , Re = V*D / ?


e, which is the roughness coefficient related to the roughness of the walls.


And referring to the moody chart relates to the roughness e and the Reynolds number for determining the friction factor, (f).


Manometer


Rotometer


Pump


Venturi Tube


Make sure all equipments are clean.


Task is divided into separate group.


Make sure that the system valves are closed, i.e. If the pipe flow with diameter ¾ inches is used, make sure that the valves other pipes are closed. This way there will be no leakage in the system.


Recording the pressure levels and make sure that there is no back pressure build in the pump and that all flow is continuous.


Sample calculation using major ¾ inches


First convert ?P in inches to ft:


Flow rate = Q =


Flow Rate = Q =


Flow Rate = Q = 0.018364 ft3 / sec


Converting Flow Rate from (ft3 / sec) to (gallons / minute)


448.8311688 ft3/s/g/m * .015 ft3/s = 8.242475 gallons / minute


Velocity = Flow Rate / Area = Q / A = .015 ft3 / sec / .003360986 ft2 = 5.463979 ft / sec


Reynolds Number = (v * D) / ? = (4.556 ft / sec * 1.025 * 1 ft / 12 in) / (.000011 ft2 / sec) = 42428.63


Friction Factor = Recorded using Moody Chart = 0.0217


Head Loss = f * (L / D) * (V2 / 2 * g)


Head Loss = 0.0217 * (5 ft / 1.025 in * 1 ft / 12 in) * ((5.463979 ft/sec) 2 / 2 * 32.2 ft / sec2)


Head Loss = 0.58887 ft


Indicated Head Loss = 0.541667 ft


% Error = [Experimental value – Actual Value] / [Actual Value] * 100 %


% Error = [0.58887 – 0.541667] / [0.541667] *100 % = 8.714433 %


The data collected and calculated results do coagulate the equation, hf = f * (L / d) * (V2 / 2 * g), showing that pipe head loss equals the change in the sum of pressure and gravity head. Hence, it can be said that the friction factor is a function of the Reynolds Number, and hence the roughness factor is valid.



This is Preview only. If you need the solution of this assignment, please send us email with the complete assignment title: ProfessorKamranA@gmail.com